Inconel 600 Round Bars

Grades

Inconel 600 Round Bars

Inconel 600 round bars are commonly used in industries where their combination of corrosion resistance, high-temperature capability, and thermal conductivity is essential. Their versatility and reliability make them suitable for a wide range of critical applications, particularly in high-temperature and corrosive environments.

Inconel 600 belongs to a family of austenitic superalloys. The Inconel 600 Round Bar is made with a chemical composition comprising of carbon, nickel, manganese, silicon, ferrous, sulfur, chromium, and copper. These bars possess superior strength and are resistant to corrosion and erosion in stress-induced environments. The Alloy 600 Rod doesn’t deform or dissociate easily under extreme pressures and elevated temperatures. These rods are available in standard sizes between 5mm to 500mm which can be customized on request. The UNS N06600 Hex bar possesses good mechanical properties and enhanced hardness. These bars possess a minimum tensile strength of 655Mpa and a minimum yield strength of 310Mpa. They can be elongated by 40% and still exhibit excellent machinability. We are the top Inconel 600 Round Bar suppliers in the country. Our goal is to supply high-quality products to all our clients at reasonable rates.

Specifications

Corrosion Resistance: Inconel 600 round bars offer exceptional resistance to corrosion in various environments, including high-temperature oxidation and chloride-ion stress corrosion cracking.
Temperature Capability: These round bars can operate effectively at elevated temperatures, making them suitable for high-temperature applications in industries such as aerospace, furnace components, and heat exchangers.
Thermal Conductivity: Inconel 600 possesses excellent thermal conductivity, which can be advantageous in heat exchangers and other heat transfer applications.
Mechanical Properties: Specifications for tensile strength, yield strength, and elongation ensure the material’s mechanical reliability, especially in demanding conditions.
Standards: Compliance with industry standards, often specified under ASTM B166 for Inconel round bars, ensures consistent quality and performance.

size range

Diameter Range: 8mm – 250mm
Length – Upto 6000mm

Material Certification and Traceability

At Satyam Overseas, we prioritize Material Certification and Traceability. Our materials, meeting ASTM and ASME standards, come with 3.1 Mill Test Certificates as a guarantee of compliance. Additionally, upon request, we provide 3.2 Mill Test Certificates for added assurance. Every material is clearly marked and accompanied by a corresponding certificate, meticulously linking markings to certification. This meticulous approach ensures complete accountability and unwavering reliability throughout our supply chain.

Chemical Composition

	Nickel	Chromium	Iron	Carbon	Manganese	Sulfur	Silicon	Copper
Min	72.0	14.0	6.00	–	–	–	–
Max	–	17.0	10.00	0.15	1.00	0.015	0.50	0.50

Physical Composition

Density, lb/in3 .	0.306
Density,Mg/m3	8.47
Melting Range, °F	2470-2575
Melting Range, °C	1354-1413
Specific Heat, Btu/lb-°F	0.106
Specific Heat,J/kg-°C	444
Electrical Resistivity, ohm-circ mil/ft	620
Electrical Resistivity, μΩ-m	1.03
Curie Temperature, °F	-192
Curie Temperature, °C	-124
Permeability at 200 oersted (15.9 kA/m)	1.010

Designations & Standards

Forms	ASTM	ASME	DIN
Rod, Bar, Wire and Forging Stock	B 166 B 564	SB 166 SB 564	17752
Plate, Sheet and Strip	B 168 B 906	SB 168 SB 906	17750

Differences between Inconel and Hastelloy

Inconel and Hastelloy are both nickel-chromium-molybdenum-based alloys. They are all corrosion-resistant and extremely strong metals. Hastelloy has greater molybdenum content than Inconel, although Inconel has a higher chromium concentration. This sets them apart in terms of corrosion resistance in different situations.

Nickel Alloys

Titanium

stainless steel

Nickel Alloys

Titanium

stainless steel