Incoloy 825 Wires
- Home
- :
- Grades
- :
- Nickel Alloys
- :
- Incoloy 825 Wires
Grades
Incoloy 825 Wires
Incoloy 825 is a nickel-iron-chromium alloy with additional elements like copper, molybdenum, and titanium. It is known for its excellent corrosion resistance, especially in aggressive chemical environments. Incoloy 825 wires are vital components in various industries and offer specific properties to suit a wide range of applications.
The resistant to pitting and crevice corrosion of Incoloy 825 Wire and with appropriate heat treating, it is stable against the sensitization to inter – granular corrosion. Incoloy 825 Coil Wire has good mechanical properties at both room and elevated temperatures up to approximately 1000 Degree F. Incoloy 825 Wire offers exceptional resistance to corrosion by sulfuric and phosphoric acids and is often the most cost effective alloy in sulfuric acid service. Incoloy 825 Wire is often used in Radioactive waste handling, Nuclear fuel reprocessing, Marine exhaust systems, Pickling tank heaters, tanks, and equipment. Incoloy 825 Wire has good weldability by all conventional processes, and is developed to provide exceptional corrosion resistance in both oxidizing and reducing environments. Alloy 825 Filler Wire, in conjunction with the molybdenum and copper, also gives outstanding resistance to reducing environments such as those containing sulfuric and phosphoric acids. Typical applications of Alloy 825 Coil Wire are: phosphoric acid evaporators; pickling – tank heater, pickling hooks and equipment; etc. Alloy 825 Wire is also used in chemical processing, acid production, oil and gas well piping, propeller shafts, and more. Alloy 825 Wire is characterized by good resistance to chloride – induced pitting and crevice corrosion.
Specifications
- Incoloy 825 Wires:
- Incoloy 825 wires are extensively used in industries where resistance to corrosion is crucial, including chemical processing, petrochemical, and marine applications.
- They exhibit outstanding resistance to a variety of corrosive substances, such as sulfuric acid, phosphoric acid, and seawater.
- Incoloy 825 wires are available in different diameters and lengths, catering to specific project requirements.
Incoloy 825’s exceptional resistance to both reducing and oxidizing acids, as well as its capacity to maintain mechanical properties at elevated temperatures, makes it a preferred choice for applications where corrosion is a primary concern. When selecting Incoloy 825 wires for a particular application, it’s important to consider the corrosive environment and the required performance characteristics to ensure the effectiveness and durability of the materials in that specific setting.
- Incoloy 825 Wires:
size range
Size – 0.20mm to 12mm
We supply hardness of wire (Soft, Quater Hard, Half Hard) according to customer requirements.
Material Certification and Traceability
At Satyam Overseas, we prioritize Material Certification and Traceability. Our materials, meeting ASTM and ASME standards, come with 3.1 Mill Test Certificates as a guarantee of compliance. Additionally, upon request, we provide 3.2 Mill Test Certificates for added assurance. Every material is clearly marked and accompanied by a corresponding certificate, meticulously linking markings to certification. This meticulous approach ensures complete accountability and unwavering reliability throughout our supply chain.
Chemical Composition
| Ni | Fe | Cr | Mo | Cr | Ti | C | Mn | S | Si | |
|---|---|---|---|---|---|---|---|---|---|---|
|
Min |
38 |
20 |
19.5 |
2.5 |
|
0.6 |
|
|
|
|
|
Max |
46 |
38 |
23.5 |
3.5 |
1 |
1.2 |
0.025 |
1 |
0.015 |
0.5 |
Physical Composition
| Density | Melting range | Relative magnetic permeability at 20 °C (68 °F) |
|---|---|---|
|
8.14 g/cm3 (0.294 lb/in3 ) |
1,370-1,400 °C (2,500-2,550 °F) |
1.005 (Maximum)
|
Designations & Standards
| Forms | ASTM | ASME | DIN |
|---|---|---|---|
|
Wire |
17744 |
- |
17744 |